====== Reinforced Concrete ======
CE 3213 [[http://webct.utsa.edu]]†.

  * 7/5/07, 7:00-8:30 pm: Make-up Exam
  * 7/9/07, 10:30 am - 1:00 pm: Final Exam





====== Homework ======
Homework is due at 5:00 p.m.
  * [[concrete:hw2_1]]✔
  * [[concrete:hw2_2]]✔
  * [[concrete:hw2_3]]✔
  * [[concrete:hw2_4]]✔
  * [[concrete:hw2_5]]✔
  * [[concrete:hw2_6]]✔
  * [[concrete:hw2_7]]✔
  * [[concrete:hw2_8]]✔
  * [[concrete:hw2_9]]✔
  * [[concrete:hw2_10]]✔
  * [[concrete:hw2_11]]✔
  * [[concrete:hw2_12]]✔
  * [[concrete:hw2_13]]✔
  * [[concrete:hw2_14]]✔
  * [[concrete:hw2_15]]✔
  * [[concrete:hw2_16]]✔







====== Project 1: Field Visit to a Concrete Construction Site ======
//The project should be developed in groups not exceeding four students.  A group shall consist of three to five students. Each group must visit a different site. On July 3, each group will give a short [[concrete:presentation|presentation]] (minimum 10 minutes, maximum 15 minutes) on their field visit.//

  * [[concrete:members]]
  * [[concrete:report]]
  * [[concrete:presentation]]

Photos from 6/11/07


===== Due Dates =====

//[[concrete:members|Group members†]] and site selection: No later than June 14, 2007, submit at the beginning of the class the names of group members (minimum 3 and maximum 5) and a location map of the site selected.//

//[[concrete:report|Final report]] and [[concrete:presentation|presentation]]: July 3, 2007. Final reports will not be returned. Make copies of the sections of the report you wish to keep. Reports must include an electronic copy of presentation.//


===== Grading =====
//You will be graded on the quality of the report, the quality of the presentation, and your writing and
oral skills.//



{{gallery>concrete:photos?4}}


====== Project 2 ======
[[concrete:project_2-assignment]]

  * June 11: [[concrete:project_2-config|Structural configuration]] (including preliminary sizes), construction sequence, material types and loading.  {{concrete:project_1-config.svg}}
  * June 18: [[concrete:project_2-vm|Shear and bending moment diagram envelopes]] for slab, and frames. 
  * June 25: Design of [[concrete:project_2-slab-beam|slab and beams]] 
  * June 28: Design [[concrete:project_2-col|Columns]]. 
  * July 2: [[concrete:project_2-footings|Design of footings]] and [[concrete:project_2-drawings|final drawings]]. 
  * July 5: Summarize quantities, calculate cost and submit [[concrete:project_2-report|final report]] (reports will not be returned). (No later than 5 p.m.)