7/3 Report
This sheet should include as a minimum the course name, course number, project name, name of group members, and submission date.
Self-explanatory.
Describe briefly the project, and the site visits (200 – 400 words).
✔Project summary—dw
Describe the structural system and components, the types of loads to be carried and how loads are transferred to the foundation. Include the strength of the reinforcing bars and the concrete used in each component (1000 to 2000 words, this is about 2 to 4 pages*). Describe the location of the reinforcing steel and its functionality. Provide at least a 2D sketch of the idealized load carrying mechanism and explain your assumptions.
Describe the construction procedures observed in the field visits (1000 to 2000 words).
Summarize key observations during the site visits and describe the group’s learning experience.
Include the names of individuals or companies that assisted you in gathering the information of this report.
List any references used in the preparation of the report.
✔Appendix I: Answer to questions.
Answer all the questions listed under Questions.
Appendix II: Site location map and site photographs.
Include a site location map, and as a minimum photographs showing a general view of construction site, identification marks of reinforcing steel, details of concrete members (reinforcing steel placement, stirrups, splices, connections), and concrete forms. Each photograph should have a proper caption.
Appendix III: Drawings
Include a typical architectural layout and structural drawings showing components and details. It is not necessary to include a full set of plans.
Appendix IV: Miscellaneous
If available, include copies of mix designs and laboratory testing of reinforcing steel.
*A page is considered to be letter size, 1-inch margins all around, printed on one side, singled-spaced, with characters no larger than 12 point.
Discussion